A little preparation makes it easier to plan where your Faith Inflatables 10-Foot Inflatable Jesus will stand, how it will connect to power, and where it will go after the celebration. Use this checklist alongside the included instruction guide, which takes priority for installation, electrical connections, anchoring, operation, and storage. This is a planning guide, not a substitute for those instructions.

1. Check the kit before choosing a setup day

Read the included instruction guide before unfolding your Faith Inflatables Jesus display, and use it as the authority for installation and operation. Lay out the display, stakes, tie-downs, branded storage bag, clear repair patch kit, and instruction guide so you can check the supplied items before starting. The blower is sewn directly into the display, so there is no separate blower to position beside it. If something is missing, damaged, or unclear, do not proceed or improvise changes to the blower, electrical components, or anchoring arrangement.

2. Measure the figure and the full installation area

Measure a proposed location for the full inflated figure: 124 inches tall, 76 inches fingertip to fingertip, and 44 inches across the base. Allow the additional anchoring space required by the included instructions; a 44-inch-wide base does not mean the whole installation fits in a 44-inch space. Check the location of doors, driveways, accessible routes, and the place where people will stand to view or photograph the display. At a church or community venue, confirm the location with the property team before committing to the layout.

3. Plan the power connection before installation

Identify the GFCI-protected outdoor outlet specified in the product guidance, then plan a connection that keeps electrical equipment outside walking routes. The display has a 6-foot power cord, so check the distance from the intended position before beginning rather than assuming the cord will reach. Keep the electrical connection dry and elevated, and follow the included instructions for every part of the connection. The display must remain connected to power while inflated; if you are unsure about the available electrical connection, obtain qualified advice before proceeding.

4. Follow the included anchoring instructions

Use the supplied stakes and tie-downs exactly as directed in the instruction guide rather than making up a different anchoring arrangement. Give the full installation its planned space and keep the blower, cords, stakes, and tie-downs unobstructed. Walk the surrounding guest route after setup to check that entrances and viewing positions remain separate from the equipment. Complete these checks before visitors arrive, and do not let decorative additions, signs, or photo queues encroach on the installation.

5. Make a weather plan before each use

Review the product’s weather guidance and local conditions before operating the display, especially when planning a church service or outdoor gathering. The product guidance permits operation during light rain only when the display is properly secured and connected to a GFCI-protected outdoor outlet, with the electrical connection dry and elevated. During heavy rain, standing water, high winds, or severe weather, unplug the inflatable and move it to a protected area as directed. Decide where that protected area will be before the event, and continue checking conditions rather than treating the initial setup check as sufficient for the whole day.

6. Leave time for drying before packing

At the end of the display period, follow the instruction guide’s shutdown, deflation, and packing directions. Allow the inflatable to dry completely before folding it and putting it into the included storage bag; do not let an event’s finish time become a reason to pack it away damp. Keep the accessories together and account for the stakes and tie-downs before leaving the installation area. The total packed product weighs 4.96 lb, making the packed display practical to move between seasonal uses.

7. Keep the next setup easy to plan

Choose a clean, dry storage location and keep the instruction guide and order information where you can find them again. A simple note with your chosen location, power-connection plan, and a photo of the completed arrangement can help you plan the next display without relying on memory. Recheck the location, equipment, and current conditions before using the display again rather than assuming the previous plan still applies. The same standalone Jesus figure can return for Christmas, Easter, and other faith-centered occasions, with a fresh setup check for each use.

Find the full product specifications, included accessories, and current preorder details on the product page.

PRE-ORDER NOW